A fast acting, stable, triazine free biocide suitable for use in watermix fluid formulations and for fuels.
Features:
- Broad spectrum efficacy
- Triazine free
- Suitable for pre and post treatment
- Stable in alkaline conditions
- Completely oil and water soluble
How to use:
For contaminated diesel fuel, 200-500 ppm of Multipurpose Biocide is generally sufficient (this corresponds to 0.2-0.5 litres per tonne of diesel fuel).
As a result of the good stability of Multipurpose Biocide in diesel fuel, after three months storage at room temperature, more than 80% of the initial concentration was still detected. Multipurpose Biocide can thus ensure adequate long-term protection even with low concentrations of 50-200 ppm.
In case of microbial contamination of tank systems that is already visible or is causing technical problems, e.g. if filter blockages frequently occur, it is recommended to shock dose with 500-1000 ppm of Multipurpose Biocide.
Multipurpose Biocide is best added to the dewatered tank that is about a third full. When the tank is filled, the product is mixed into the system. The dosage must be related to the total volume. In cases of heavy fouling, the system should, if possible, be cleaned before Multipurpose Biocide is used.
Storage - between 10°C and 30°C out of direct sunlight